
Short answer
Rarely in 2026. ATRI puts the average cost of running a truck at $2.336 a mile (2025 data). DAT's September 2026 van spot rate is $3.01 all-in, but only $2.17 linehaul. A $2 load works only if it is all-in, your costs are low, and you run few empty miles.
Open the Break-Even Rate Per Mile Calculator
Example numbers from the Break-Even Rate Per Mile Calculator. Open it to use your own.
Rarely in 2026. ATRI puts the average cost of running a truck at $2.336 a mile (2025 data). DAT's September 2026 van spot rate is $3.01 all-in, but only $2.17 linehaul. A $2 load works only if it is all-in, your costs are low, and you run few empty miles.
It depends what the $2 includes
A broker who says "$2 a mile" may mean linehaul only, with fuel paid separately, or an all-in number with fuel built in. Those are very different loads. With diesel above $6 a gallon, fuel is a big part of the rate.
DAT's September 2026 spot rates per mile:
| Equipment | All-in | Linehaul (no fuel) | Fuel surcharge |
|---|---|---|---|
| Dry van | $3.01 | $2.17 | $0.84 |
| Reefer | $3.62 | $2.70 | $0.92 |
| Flatbed | $3.61 | $2.60 | $1.01 |
Source: DAT September 2026 press release (link in Sources). The fuel surcharge column is all-in minus linehaul.
Two things follow. A $2.00 all-in offer is about $1.01 under the van spot average. A $2.00 linehaul offer is below the van linehaul average of $2.17, and it only works if a fuel surcharge on top covers your fuel. Use the fuel surcharge calculator to see what that surcharge is worth on your miles.
What a mile costs
ATRI's 2026 report (2025 data) puts the average cost of operating a truck at $2.336 a mile, the highest in the study's history. Without fuel it is $1.854.
| Line item | About, per mile (2025) |
|---|---|
| Fuel | $0.48 |
| Driver wages | $0.818 |
| Driver benefits | $0.210 |
| Repair and maintenance | $0.215 |
| Truck and trailer payments | $0.404 |
| Insurance | $0.106 |
| Tires | $0.050 |
| Tolls | $0.043 |
| Permits and licenses | $0.008 |
| Total | $2.336 |
Sources: ATRI, FleetOwner, FreightWaves (links in Sources). The lines are rounded and do not add to the total exactly.
Here is the honest caveat. ATRI averages include driver wages and benefits, so $2.336 is a fleet figure. It is not an owner-operator's books. Subtract wages and benefits ($1.028) and about $1.31 is left, our arithmetic and not an ATRI number. That $1.31 still leaves out things you pay for, like dispatch and factoring, and it leaves out your own pay.
So do not copy $2.336. Work out your own number with the cost per mile calculator.
Deadhead changes the answer
Empty miles earn nothing but cost the same. Your rate has to cover them.
Break-even per loaded mile = cost per mile / (1 - deadhead %)
Example only. The $1.90 cost per mile is invented, not a Haul Math or ATRI figure.
| Deadhead (example) | Break-even per loaded mile (example) |
|---|---|
| 0% | $1.90 |
| 10% | $2.11 |
| 20% | $2.38 |
| 30% | $2.71 |
Say it plainly: a $2.00 a mile load at 20% deadhead and a $1.90 cost per mile loses money. You need $2.38 to break even, so you are about $0.38 short on every loaded mile. That is the example, not a forecast for your truck. For the two ways to figure a rate, see how to calculate rate per mile.
Find your own empty-mile share with the deadhead miles calculator, then get your floor from the break-even rate per mile calculator.
A 4-step check you can do on the phone
- Know your cost per mile. Use your own number, not an average. The free cost-per-mile sheet walks you through it.
- Know your deadhead %. Empty miles divided by total miles.
- Ask: all-in or linehaul? Get the answer before you talk numbers. If fuel is separate, ask the surcharge per mile.
- Multiply. Divide your cost per mile by (1 - deadhead %). If the all-in rate is below that, say no or counter.
Run the full trip through the load profit calculator. When you accept, check the paperwork with the rate confirmation checker so the rate and fuel terms match what you were told.
What the other pages say
Hey Bubba's rate-per-mile guide, updated October 5, 2026, still quotes roughly $2.00 to $2.50 all-in for dry van. DAT's September 2026 all-in van spot rate is $3.01. The gap is large, and we side with the DAT figure for a current all-in number. Check the date on any rate guide you read.
Common questions
- Is $2 a mile good for an owner operator?
- Usually not in 2026. ATRI's average cost is $2.336 a mile, and that includes driver pay. Your own costs may be lower, but at 20% deadhead even a $1.90 cost needs $2.38 a loaded mile (example).
- What is a good rate per mile in 2026?
- For a benchmark, DAT's September 2026 van spot average was $3.01 all-in and $2.17 linehaul. Reefer was $3.62 all-in and flatbed $3.61. A good rate for you is one above your own break-even.
- Is $2 a mile before or after fuel?
- Ask. Linehaul excludes fuel and all-in includes it. DAT's September van fuel surcharge averaged $0.84 a mile, so the two can differ by a lot.
- How much does it cost to run a truck per mile?
- ATRI reports an average of $2.336 a mile for 2025, or $1.854 without fuel. That includes driver wages and benefits ($1.028), so an owner-operator's own figure will differ.
- How do empty miles change my rate?
- They raise the rate you need on loaded miles. Divide your cost per mile by (1 - deadhead %). A $1.90 cost at 20% deadhead needs $2.38 a loaded mile (example).
Sources
- ATRI press release, July 2026
- ATRI, Analysis of the Operational Costs of Trucking: 2026 Update
- FleetOwner, ATRI report breaks down Class 8 truck operating costs, July 22, 2026
- FreightWaves, ATRI costs, July 15, 2026
- DAT, truckload rates in September 2026 (released October 13, 2026)
- Hey Bubba, What Is a Good Rate Per Mile for Trucking (updated October 5, 2026)

Free, no signup
Know your number before you take the load
26 free calculators, no signup. Want your loads and numbers saved? Try Pro free for 14 days, no card.