Blog
How to Know Your Minimum Rate Per Mile Before Taking Any Load
Your floor rate is your own cost per mile plus the margin you need. Here is how to build it, check it against market rates, and use it to say no.
Your minimum rate per mile is your own cost per mile plus the margin you need to stay in business. One rule of thumb is that a good rate beats your personal cost per mile by at least 20%. Datatruck puts the owner-operator floor at $1.70 to $2.20 per mile, depending on cost structure, but your truck payment, insurance and fuel burn decide where you land. American Truckers LLC sells trucking tools and Datatruck sells carrier software, so treat their figures as benchmarks, not rules.
The quick version
- Add up your fixed costs for a month and divide by the miles you actually run.
- Add your per-mile costs: fuel, maintenance, tires.
- Add your margin, as a percentage or as dollars per mile.
- The result is your floor. Turn down anything below it, measured on total miles including empty ones.
- Redo the math when diesel, insurance or your payment changes.
The formula
TruckingWay gives the formula as cost per mile plus profit margin equals minimum rate. Its example: a $1.35 cost per mile with a 20% margin gives a $1.62 minimum. The arithmetic is $1.35 times 20%, which is $0.27, and $1.35 plus $0.27 is $1.62.
A percentage margin is one way to set the floor. A dollar margin is another. Datatruck says owner-operators need to net at least $0.50 to $0.70 per mile after expenses to justify the business risk. On a $1.35 cost, a 20% margin of $0.27 is below that $0.50 low end. Our view: check both numbers and use the higher one.
What goes into your cost per mile
Start with your own statements, not averages. The ranges below are for sanity checks. Annual items such as permits should be divided by 12 before you divide by monthly miles.
| Cost | Range reported | Source |
|---|---|---|
| Truck payment | Industry average now equal to $2,600+ per month | TruckingWay |
| Insurance, new authority | $1,200 to $2,000 per month | TruckingWay |
| Permits and licenses | $3,000 to $5,000 per year, depending on your states | TruckingWay |
| Factoring | 2% to 5% of gross revenue, if you factor | TruckingWay |
| Fuel | $0.48 to $0.52 per mile at 6.8 MPG and $3.30 to $3.50 diesel | TruckingWay |
| Maintenance and repairs | $0.18 to $0.25 per mile | TruckingWay |
| Full set of 18 tires | $4,000 to $6,000 | TruckingWay |
Sources disagree on some shares. Datatruck says fuel is 20% to 30% of total operating costs. TruckingWay says fuel is 35% to 45% of total cost. Different fleets, different years, different diesel prices. That gap is the reason to use your own receipts.
Fuel moves your floor fast
TruckingWay's fuel range assumes $3.30 to $3.50 diesel. Our homepage currently shows a diesel average of $6.352 per gallon, from the EIA for the week of Oct 26, 2026, up $0.076 from the prior week. At TruckingWay's 6.8 MPG industry average, $6.352 divided by 6.8 is about $0.93 per mile. That is our arithmetic, and it assumes your truck gets 6.8 MPG. Use your own MPG.
If you pass fuel costs to brokers, the fuel surcharge calculator helps you work out what to ask for.
Benchmarks to check your number against
Use these to see whether your cost per mile is in a believable range. Do not use them as your floor.
- TruckingWay says most full-time owner-operators land between $1.15 and $1.45 per mile all-in. It also says $0.90 to $1.10 per mile is achievable with a paid-off truck.
- Datatruck lists a typical owner-operator cost breakdown of $1.20 to $1.53 per mile.
- Datatruck cites ATRI for about $1.85 per mile for long-haul carriers. TruckingWay says ATRI's full industry operational cost is $2.26 per mile.
Those figures differ because they measure different things. Fleet averages include costs a single owner-operator may not carry. Our view: if your number is far from every benchmark, recheck your inputs before you trust it.
Adding Datatruck's cost range to its net target gives a floor. The low end is $1.20 plus $0.50, which is $1.70. The high end is $1.53 plus $0.70, which is $2.23. That is close to Datatruck's stated $1.70 to $2.20 minimum.
Count every mile you run
A rate per mile only means something if you know which miles it covers. A load that pays well per loaded mile can fail once you add the empty miles to get there or get home.
Here is a made-up example, not real data. A load pays $800 for 400 loaded miles, and you run 100 empty miles afterward. The rate on loaded miles is $800 divided by 400, which is $2.00. The rate on all 500 miles is $800 divided by 500, which is $1.60. If your floor is $1.80, this load fails even though $2.00 looks fine.
Our deadhead miles calculator does this split for you. Our view: judge every load on total miles.
A made-up floor, step by step
Here is a made-up example, not real data. Say fixed costs are $6,000 a month and you run 10,000 miles a month. Your per-mile costs (fuel, maintenance, tires) add up to $0.90.
- Fixed cost per mile: $6,000 divided by 10,000 is $0.60.
- Total cost per mile: $0.60 plus $0.90 is $1.50.
- A 20% margin: $1.50 times 20% is $0.30.
- Floor: $1.50 plus $0.30 is $1.80.
The cost per mile calculator runs these steps with your numbers. The break-even rate calculator shows the rate where you earn nothing, which is the line under your floor.
Check your floor against market rates
American Truckers lists 2026 spot market averages by equipment type. It describes them as national averages, so lanes and seasons will differ. American Truckers sells trucking tools and load board referral links, so use this as a rough guide.
| Equipment | Spot rate per mile |
|---|---|
| Dry van | $1.80 to $2.40 |
| Reefer | $2.20 to $3.00 |
| Flatbed | $2.10 to $2.80 |
| Hot shot, non-CDL | $1.50 to $2.50 |
| Hot shot, CDL | $2.00 to $3.50 |
The same source says contract rates run 15% to 30% higher than spot rates. In the made-up example above, the $1.80 floor sits at the bottom of the dry van range. Many dry van spot loads would clear it only by a little. The gap between the floor and the posted rate is the information you want before you call a broker.
If you are a new authority
New carriers often have a higher floor. American Truckers says new carriers pay insurance of $1,200 to $1,800 a month versus $800 to $1,000 for experienced operators. It also says they pay factoring fees of 4% to 5% versus 2% to 3%. TruckingWay says new-authority insurance typically runs $1,200 to $2,000 a month.
American Truckers describes a typical new-carrier path as 100% spot freight in months 1 to 6, then 70% spot and 30% contract in months 6 to 12. Our view: with a higher floor and mostly spot freight, saying no to low loads matters most in the first year.
Why a few cents per mile matter
American Truckers notes that $0.10 more per mile on a 1,000-mile load is $100 extra. The arithmetic is $0.10 times 1,000 miles. Small differences in rate add up across a year of loads, which is why a firm floor helps.
Use the floor in practice
- Recalculate your cost per mile each month from real statements.
- Pick a margin, in percent and in dollars per mile.
- Write the floor on total miles, and keep it where you see it when you answer a broker.
- Quote at or above the floor. If the broker will not move, pass.
- Review the floor when diesel, insurance or your payment changes.
Tax rules and deductions affect what you keep, so check them with a CPA. Nothing here is tax or legal advice, and none of these figures promise any result for your business.
Once you have a floor, you still need to test each load against it, including empty miles, fuel and fees. Run your numbers in the free load profit calculator and see the math behind the result: Run your numbers in the free load profit calculator.
Common questions
- What is a good rate per mile for an owner-operator?
- American Truckers defines [a good rate as one that exceeds your personal cost per mile by at least 20%](https://www.americantruckersllc.com/blog/good-rate-per-mile-trucking-2026.html). Datatruck says [owner-operators should accept loads at $1.70 to $2.20 per mile minimum, depending on cost structure](https://www.datatruck.io/blog/the-real-costs-of-running-a-trucking-company-in-the-usa:-a-carrier's-perspective). Your own cost per mile is what makes either number real.
- Should I use loaded miles or total miles?
- Our view: use total miles, including empty miles to pickup and home. Loaded-mile rates can hide a load that loses money once deadhead is counted.
- Is the ATRI cost per mile my minimum rate?
- No. TruckingWay says [ATRI's full industry operational cost is $2.26 per mile](https://www.truckingway.com/cost-per-mile-calculator/), and Datatruck cites ATRI for [about $1.85 per mile for long-haul carriers](https://www.datatruck.io/blog/the-real-costs-of-running-a-trucking-company-in-the-usa:-a-carrier's-perspective). Those are industry figures, not yours. Use them as a check on your own number.
- Do contract rates change my floor?
- Your floor stays the same. American Truckers says [contract rates run 15% to 30% higher than spot rates](https://www.americantruckersllc.com/blog/good-rate-per-mile-trucking-2026.html), so contract freight may clear your floor more easily.
- How often should I recalculate my minimum rate?
- Our view: monthly, and any time a big cost changes. Diesel can move quickly. Our homepage shows [a weekly rise of $0.076 per gallon, EIA week of Oct 26, 2026](https://haulmath.co/).
Run your own numbers
Free calculators for owner-operators: load profit, cost per mile, IFTA, per diem, and more. Every answer shows the math.