Skip to content
Haul Math

Tennessee Truck Weight and Size Limits

Legal limits for a truck in Tennessee without a permit: Interstate axle and gross weights, height, width, and semitrailer length, each with its official source.

Data pending verification

Some official figures this page relies on haven't been confirmed against the source yet. Don't rely on results here until this notice is gone.

What's pending
  • weight-limits/states/tennessee

Tennessee limits at a glance

Tennessee truck size and weight limits with sources
LimitTennesseeSource
Interstate gross weight80,000 lb23 CFR 658.17, Weight (eCFR)
Interstate single axle20,000 lb23 CFR 658.17, Weight (eCFR)
Interstate tandem axle34,000 lb23 CFR 658.17, Weight (eCFR)
Width (National Network)102 in23 CFR 658.15, Width (eCFR)
HeightPending verificationFHWA, Compilation of Existing State Truck Size and Weight Limit Laws (Report to Congress, May 2015), Appendix A: Tennessee
Semitrailer lengthPending verificationFHWA, Compilation of Existing State Truck Size and Weight Limit Laws (Report to Congress, May 2015), Appendix A: Tennessee
Grandfathered semitrailer length50 ft23 CFR part 658, Appendix B, Grandfathered Semitrailer Lengths (eCFR)

Interstate weight limits

Federal law sets the Interstate limits at 20,000 lb on a single axle, 34,000 lb on a tandem, and 80,000 lb gross, with the bridge formula on every axle group (23 CFR 658.17). States may keep higher limits they had before the federal limits took effect ("grandfather rights").

Bridge formula check with Tennessee limits

A 5-axle tractor-trailer is filled in. Change the spacings and weights to match your rig; the limits for single axles, tandems, and gross are Tennessee's Interstate limits.

Axle spacings

Center of one axle to the center of the next, in feet. Axle 1 is the steer axle. 4 ft 6 in = 4.5.

Axle weights (optional)

From your scale ticket. Leave all blank to see the limits only.

Your result

Enter your axle spacings and tap "Check bridge formula". A 5-axle tractor-trailer is filled in.

Open the full bridge formula calculator →

Tennessee limits off the Interstate

FHWA's summary of Tennessee law for trucks in regular operation (no permit), including non-Interstate highways. It reflects state law as of October 1, 2012; check the state for later changes.

Single axle
20,000 lbs.
Tandem axle
34,000 lbs.
Tridem axle
54,000 lbs.*
Gross weight
80,000 lbs.

Where Tennessee allows more than federal limits

Height, width, and length

Over these limits you need a permit. Tennessee oversize/overweight permits (615-741-3821).

Tennessee compared with neighboring states

Interstate weight limits, height, and semitrailer length. "Pending" means not yet verified.
StateGrossSingleTandemHeightSemitrailer
Tennessee80,000 lb20,000 lb34,000 lbPendingPending
Alabama80,000 lb20,000 lb34,000 lbPendingPending
Arkansas80,000 lb20,000 lb34,000 lb14 ftPending
Georgia80,000 lb20,340 lb34,000 lb13 ft 6 in53 ft
Kentucky80,000 lb20,000 lb34,000 lb13 ft 6 in on highways the Transportat…53 ft on designated highways
Mississippi80,000 lb20,000 lb34,000 lbPendingPending

Sources

Source: 23 CFR 658.17, Weight (eCFR) · Last verified Sep 28, 2026

Source: FHWA, Compilation of Existing State Truck Size and Weight Limit Laws (Report to Congress, May 2015), Appendix A: Tennessee · Effective Oct 1, 2012 · Last verified Sep 28, 2026

Source: 23 CFR 658.15, Width (eCFR) · Last verified Sep 28, 2026

Source: 23 CFR part 658, Appendix B, Grandfathered Semitrailer Lengths (eCFR) · Last verified Sep 28, 2026

Source: FHWA, Oversize/Overweight Load Permits: State permit contacts · Last verified Sep 28, 2026

Limits change, and cities, counties, and posted bridges can set lower ones. Check with Tennessee before you run a load near the limits. Page data last verified Sep 28, 2026.

← All states: truck weight limits by state