Skip to content
Haul Math

Guide

How Much Do Owner Operators Make in 2026?

Scott Wilder
By , Editor
Updated

Haul Math (haulmath.co) is a free set of trucking calculators by Hive Asset Group, LLC.

View through a truck windshield of a semi on a highway under an overcast sky

Short answer

Owner-operator income varies widely, and no single number fits. Gross revenue is not take-home. ATRI puts the cost of running a truck at $2.336 a mile (2025 data), and DAT's September 2026 van spot rate was $3.01 all-in. What stays with you depends on your rate, your costs, and your empty miles.

Open the Cost Per Mile Calculator

Why there is no one number

Two owner-operators can pull the same gross and keep very different amounts. One has a paid-off truck and runs dedicated freight. The other has a note on a new tractor, buys fuel at retail, and sits empty between loads. Anyone who gives you a single "average owner-operator income" is hiding that spread. This page does not promise you a figure. It shows how the math works so you can run yours.

What drivers who work for a company earn

The Bureau of Labor Statistics tracks heavy and tractor-trailer truck drivers. Its median pay was $58,640 a year, or $28.19 an hour, in May 2025. That is for employee drivers. It does not measure owner-operators, who pay their own truck, fuel, insurance, and repairs out of what they bill.

MeasureFigureWho it coversSource and date
Median annual pay$58,640Employee driversBLS, May 2025 data (read Oct 25, 2026)
Median hourly pay$28.19Employee driversBLS, May 2025 data (read Oct 25, 2026)

Do not compare a company driver's pay to an owner-operator's gross. They are different things. Compare it to your net, after every cost.

What rates look like right now

DAT's September 2026 report (released October 13, 2026) gives national average rates per mile. Fuel was a big piece. DAT reported diesel averaging $6.291 a gallon for the month, the first monthly average above $6.

EquipmentSpot all-inSpot linehaulContract all-inContract linehaul
Dry van$3.01$2.17$3.24$2.40
Reefer$3.62$2.70$3.58$2.66
Flatbed$3.61$2.60$4.04$3.03

Source: DAT, September 2026 truckload rates (link in Sources). All-in includes fuel surcharge. Linehaul does not. These are national averages, not a quote for your lane.

The latest weekly diesel price from the U.S. Energy Information Administration was $6.352 a gallon on October 26, 2026, up from $6.276 on October 19.

What a mile costs

ATRI's 2026 report on 2025 data puts the industry-average cost of operating a truck at $2.336 a mile, up 3.4% from the year before and the highest in the report's history. Without fuel it is $1.854 a mile.

One catch. ATRI's average comes from fleets, and it includes driver wages. For an owner-operator, that wage line is part of what you pay yourself. So ATRI's total is a rough stand-in for cost, not your books. Work out your own number below.

Enter your fuel, insurance, truck payment, and repairs in the cost per mile calculator to get your real cost per mile.

Gross to net at three rate levels (Example, not a promise)

This is the part most income pages skip. Below, gross revenue turns into what is left after ATRI's $2.336 a mile cost, at three all-in rates. The rates are picked to bracket DAT's September numbers. They are not predictions.

Example, not a promise. The 100,000 paid miles is an assumption chosen to make the arithmetic easy. It is not an average. Your miles, rate, and costs will differ.

LineRate ARate BRate C
All-in rate per mile (example)$2.50$3.00$3.50
Cost per mile (ATRI, 2025 data)$2.336$2.336$2.336
Left per mile$0.164$0.664$1.164
Gross at 100,000 miles$250,000$300,000$350,000
Costs at 100,000 miles$233,600$233,600$233,600
Left after costs$16,400$66,400$116,400
Example: left after costs at 100,000 paid miles
Rate A, $2.50$16,400Rate B, $3.00$66,400Rate C, $3.50$116,400

Example, not a promise. Drawn from the table above.

The arithmetic, line by line:

  • Left per mile = rate minus $2.336. So $2.50 - $2.336 = $0.164. $3.00 - $2.336 = $0.664. $3.50 - $2.336 = $1.164.
  • Gross = rate x 100,000 miles. So $2.50 x 100,000 = $250,000, and so on.
  • Costs = $2.336 x 100,000 = $233,600.
  • Left after costs = gross minus costs. So $250,000 - $233,600 = $16,400.

Three things this table does not show. First, ATRI's cost already includes driver wages, so for a truck you drive yourself, part of that "cost" ends up in your pocket. Second, the table does not include income tax, self-employment tax, or anything your accountant would figure. Third, a $0.50 move in the rate moves the result by $50,000 over 100,000 miles, which is why rate and empty miles matter so much.

Worked example with deadhead

Say you bill $3.00 a mile on loaded miles, and 20% of your total miles are empty. Out of 100,000 total miles, 80,000 are loaded and paid.

  • Gross: 80,000 x $3.00 = $240,000
  • Costs at $2.336 on all 100,000 miles: $233,600
  • Left: $240,000 - $233,600 = $6,400

Same rate, same costs per mile, and the empty miles took the result from $66,400 down to $6,400. Example only, using the ATRI average as the cost line.

Enter your cost per mile and deadhead share below to get the rate you need on loaded miles in the break-even rate calculator.

How to estimate your own number

  1. Add up a year of real costs. Fuel, insurance, payment, repairs, tires, permits, tolls, and whatever else you pay.
  2. Divide by total miles, loaded and empty. That is your cost per mile.
  3. Find your break-even loaded rate. Cost per mile divided by (1 minus your empty-mile share).
  4. Compare to the rate on the load. What is above the break-even is what you keep before taxes.

Enter your yearly costs and miles in the cost per mile calculator to get step 2. Your accountant can tell you how taxes change the picture.

Haul Math tools give estimates from the numbers you enter. They do not replace an accountant. This page is general information, not tax or financial advice.

Common questions

How much do owner operators make a year?
It varies too widely for one number. BLS reports a median of $58,640 for employee heavy truck drivers (May 2025), but that does not cover owner-operators. For a truck you own, the result depends on rate, costs, and empty miles, as the table above shows.
Is gross revenue the same as take-home pay?
No. Fuel, insurance, truck payments, repairs, and other costs come out first. ATRI's average cost to run a truck in 2025 was $2.336 a mile, so at a $3.00 rate only $0.664 a mile is left before taxes (example).
What are truckload rates per mile right now?
DAT's September 2026 national averages were dry van spot $3.01 all-in and contract $3.24 all-in, reefer spot $3.62 and contract $3.58, flatbed spot $3.61 and contract $4.04.
How much does it cost to run a truck per mile?
ATRI reports $2.336 a mile for 2025, or $1.854 without fuel. That is an industry average and includes driver wages, so your own cost will differ.
What is diesel costing right now?
The EIA's U.S. on-highway diesel price was $6.352 a gallon on October 26, 2026. DAT's September 2026 monthly average was $6.291.

Sources

  1. ATRI, Operational Costs of Trucking
  2. BLS Occupational Outlook Handbook, Heavy and Tractor-Trailer Truck Drivers
  3. DAT, September 2026 truckload rates (released October 13, 2026)
  4. EIA, Gasoline and Diesel Fuel Update (Oct 26, 2026 print)

Free, no signup

Know your number before you take the load

26 free calculators, no signup. Want your loads and numbers saved? Try Pro free for 14 days, no card.

Get the free cost-per-mile sheetStart the free Pro trial