
Short answer
Hot shot trucking cost per mile depends on your truck, your payment and how many miles run empty. One public estimate puts operating cost at $0.90 to $1.40 a mile. Your number can sit outside that range. Add up a month of costs, divide by every mile you drove, then compare it with the rate you are offered.
Open the Cost Per Mile Calculator
Example numbers from the Cost Per Mile Calculator. Open it to use your own.
Enter your monthly costs and miles in the free cost per mile calculator to get your own cost per mile for a pickup and trailer.
What goes into hot shot cost per mile
The formula is the same as for a big rig: total costs for the month divided by total miles driven. Total miles means loaded and empty. If you drive 8,000 miles and 1,600 of them are empty, you still divide by 8,000 to get your real cost per mile. Our trucking cost per mile guide covers the full method.
For a pickup and gooseneck, the usual lines are:
- Fuel. Diesel price divided by your real miles per gallon, loaded and empty mixed. The EIA's national average diesel price was $6.352 a gallon on October 26, 2026.
- Insurance. Often the biggest fixed bill after the payment. See the numbers below.
- Truck and trailer payment. Fixed, whether you move or not.
- Maintenance and tires. A pickup pulling a heavy trailer wears brakes, tires and drivetrain parts fast. Set aside a per-mile amount every month.
- Permits, load board, phone, parking, tolls and scales. Small each, but they add up.
Worked example: one pickup and gooseneck for one month
This is an example, not a typical truck and not a promise of results. Every input is a made-up round number except diesel, which is the EIA price above, and insurance, which uses the Insureon medians. Swap in your own.
| Line (Example) | How it is figured | Monthly cost |
|---|---|---|
| Fuel | 8,000 miles ÷ 12 mpg = 667 gal × $6.352 | $4,235 |
| Insurance | $896 commercial auto + $32 general liability | $928 |
| Truck and trailer payment | Example amount | $1,800 |
| Maintenance and tires | $0.15 a mile × 8,000 | $1,200 |
| Permits, load board, phone | Example amount | $500 |
| Parking, tolls, scales | Example amount | $300 |
| Total | $8,963 |
Now divide:
- Cost per total mile: $8,963 ÷ 8,000 = $1.12
- Cost per loaded mile: in this example 1,600 of the 8,000 miles run empty, so 6,400 are loaded. $8,963 ÷ 6,400 = $1.40
The second number is the one that matters when a broker quotes you a rate per loaded mile. In this example you would need at least $1.40 per loaded mile just to cover costs, before paying yourself or setting money aside for repairs and taxes. Our deadhead miles guide shows how empty miles push that number up, and the break-even rate guide turns it into a minimum rate to accept.
How the market compares
DAT does not publish a hot shot rate, so there is no clean benchmark. The nearest one is flatbed. DAT's flatbed spot rate averaged $3.61 a mile in September 2026, made up of $2.60 linehaul and a $1.01 fuel surcharge. DAT does not say whether that is per loaded mile or per total mile, so do not set your own rate from it alone. Hot shot freight is often smaller and more urgent, and prices vary by lane and load.
For a larger-truck comparison, ATRI's 2026 report puts the industry-average cost to run a truck at $2.336 a mile for 2025, or $1.854 without fuel. That is for full-size fleets, so a pickup setup will usually look different.
Insurance is the line to price carefully
Insureon reports median hotshot policy costs of $896 a month ($10,757 a year) for commercial auto and $32 a month ($388 a year) for general liability, based on its own quote applicants as of June 2, 2025. Your quote depends on your record, cargo, radius and limits. Our truck insurance cost per month guide goes deeper.
The $19 workbook. An Excel file (.xlsx) with working formulas, plus a printable PDF. Enter your costs, miles and loads, and see your cost per mile, break-even rate and what each load leaves you. It is a planning tool, not a promise of results. Get the workbook
This guide is for planning only. It does not replace your accountant, insurance agent or advice for your own business.
Common questions
- What is the cost per mile for hot shot trucking?
- One vendor guide puts hot shot operating cost at $0.90 to $1.40 a mile, which is an estimate, not an official figure (DataTruck, hot shot guide). Your own cost can be higher or lower. The worked example on this page lands at $1.12 per total mile and $1.40 per loaded mile with made-up inputs.
- How much is hot shot insurance a month?
- Insureon's June 2025 data shows a median of $896 a month for commercial auto and $32 a month for general liability for hotshot businesses that requested quotes. Your quote will differ.
- Is hot shot cheaper to run than a semi?
- Per mile, usually yes on fuel, but not on every line. ATRI puts the industry-average cost of a full-size truck at $2.336 a mile for 2025, or $1.854 without fuel. A pickup burns less fuel, but insurance, payments and empty miles still add up, so compare cost per loaded mile, not just per total mile.
- How does diesel affect my cost per mile?
- Fuel is the largest line in the example. EIA's national diesel average was $6.352 a gallon on October 26, 2026, up $0.076 from the week before. At 12 mpg, each $0.50 change in diesel moves cost by about $0.04 a mile. Check the price each week.
Sources
- EIA: Gasoline and Diesel Fuel Update (weekly, Oct 26, 2026: $6.352/gal)
- DAT: Truckload rates rise in September as diesel tops $6 a gallon (Oct 13, 2026; flatbed $3.61 spot, $2.60 linehaul, $1.01 fuel surcharge)
- Insureon: Hotshot Insurance Costs (updated June 2, 2025; $896 and $32 a month medians)
- ATRI: Operational Costs of Trucking (2026 update, released July 2026; $2.336 and $1.854 a mile)
- DataTruck: What Is Hot Shot Trucking (vendor blog; $0.90 to $1.40 a mile estimate, 15 to 25 percent deadhead)

Free, no signup
Know your number before you take the load
26 free calculators, no signup. Want your loads and numbers saved? Try Pro free for 14 days, no card.