Blog
Does the Posted Rate on a Load Board Include Fuel Surcharge?
The number on a load board does not say whether fuel is in it. Here is how to tell all-in from plus fuel, what to ask the broker, and how to compare the total to your cost per mile.
The number on a load board doesn't tell you whether fuel is in it. "$2.80 a mile including fuel" and "$2.80 a mile plus fuel" are different offers, and on a 700-mile load they're $350 apart. Below: how to tell which one you're looking at, what to text the broker, and how to compare the total to your cost per mile.
Spot rates are often quoted all-in, but the number alone won't tell you
DAT's weekly spot reports describe the broker-to-carrier rate as an average linehaul rate plus a fuel surcharge, with the surcharge calculated from the weekly average diesel price EIA publishes. Those same reports note that the all-in figure trails the fuel market by about a week. Overdrive reports linehaul "less fuel surcharge" as its own figure, next to the all-in one.
On a single posting, you get no such labels. Drivers on The Truckers Report say the posted rate is usually "all in," so the fuel for that load is already baked in. But some postings do split the freight rate from the surcharge, and a guide to reading load board postings tells new carriers to confirm what's included with the broker.
The rule: assume nothing, ask once, get it in writing.
The same $2.80 can pay $350 more or less on one load
Example: say a 700-mile load at $2.80 a mile, and your all-in cost is $2.95 a mile. The surcharge, if it's listed separately, is $0.50 a mile.
| Reading | Rate per mile | Load total | Against your $2.95 cost |
|---|---|---|---|
| $2.80 including fuel | $2.80 | $1,960 | $0.15 a mile short, about $105 lost |
| $2.80 plus fuel | $3.30 | $2,310 | $0.35 a mile over, about $245 made |
Same posting, same word on the screen. One reading loses money and the other pays. If you rank two brokers' quotes without asking this, you can take the one that pays $0.50 a mile less.
Pick your case before you compare anything
Use this table when you're looking at a rate.
| What you see | What to do |
|---|---|
| Posting says "all-in" or "includes fuel" | Compare the full number to your all-in cost per mile. |
| Line haul and a separate surcharge | Add them. Compare the total. |
| One number, nothing said | Ask in writing. Don't book until the rate confirmation spells it out. |
| One number on the rate confirmation, no fuel line | Treat it as the whole payment. Don't go looking for a surcharge. |
| Market average next to a posting | Check whether the average is all-in or "less fuel surcharge." The two differ by exactly the surcharge. |
The last row trips people up. A lane average that excludes fuel will make a good all-in posting look generous, and the reverse makes a fair posting look low. For more on that comparison, see load board posted rate vs lane average.
Send this text before you accept the load
Do it in a text or email so it's on record:
Is that $[rate] a mile including fuel, or plus fuel? If plus fuel, what's the surcharge per mile and what's it based on? Please put the rate and any surcharge on the rate confirmation.
Then read the rate confirmation for three things: the line haul, the fuel surcharge (amount or per mile), and the total. Our rate confirmation checklist covers the rest of what belongs on that page, including detention and payment terms.
If the confirmation doesn't mention a surcharge at all, the number you were quoted is what you're paid. A verbal "fuel's covered" doesn't count. The rate confirmation is the document that binds.
Bundled rates: don't try to pull the fuel part back out
Some brokers show the surcharge as its own line. Others fold it into the base rate, and then there's no way to see how much of the number is meant for fuel.
Don't back into a made-up line haul figure by subtracting a surcharge you guessed. Take the total per mile, subtract your own all-in cost per mile (your fuel is already in that), and the difference is your margin. If you want to rebuild the cost side, the break-even rate per mile guide walks through it.
When diesel jumps, ask for a new total, not a surcharge
The all-in rates in market reports lag diesel by about a week, so a quote can be stale on a week when fuel moves fast. FreightWaves has a piece on negotiating with brokers when diesel climbs and linehaul rates haven't followed.
Here's the math to bring to the call:
Extra fuel cost per mile = change in diesel price per gallon ÷ your miles per gallon
Example: say diesel rises $1.00 a gallon and your truck gets 6.5 mpg. That's $1.00 ÷ 6.5, about $0.15 more per mile, or about $108 on 700 miles. Use your own mpg.
Then say it plainly:
Diesel's up about $[x] a gallon since this lane was last priced. That adds about $[y] a mile to my fuel. Can you move the all-in rate to $[z]?
If the broker quoted all-in, there's no surcharge line to raise. Asking for one on top can read like a mistake, and you may hear "the rate is the rate." The thing you can negotiate is the total.
If you're leased to a carrier, the lease decides what you get
Everything above assumes you run your own authority and book spot loads. If you're leased on, the surcharge works differently. Brokers generally don't pay a separate fuel surcharge on a lease, and not every carrier passes its surcharge to the owner-operator. Schneider's owner-operator page explains how a carrier surcharge works for leased drivers, and the answer for your lease is in the lease.
Ask your carrier: "How is the fuel surcharge calculated, how much is passed to the owner-operator, and where does it show on my settlement?"
The math: surcharge you receive = surcharge the carrier collects × the share passed to you.
Example: say the carrier bills $0.40 a mile on a 600-mile load. At 100 percent pass-through that's $240. At 70 percent it's $168. Compare (line haul + the surcharge you actually get) ÷ loaded miles to your cost per mile. Then check it against your settlement.
Four mistakes that cost real money
- Comparing line haul alone to your all-in cost. A load that pays looks like a loss. In the example, that's the $350 swing.
- Adding a surcharge to a rate that's already all-in. You count fuel twice and overrate the load.
- Mixing "less fuel" market averages with all-in postings. The gap is the surcharge, so good rates look bad and the other way around.
- Skipping the date behind the surcharge. If it's tied to a weekly diesel price, a fast move means last week's number is paying this week's fuel.
Do this in the next ten minutes
Open the last two loads you took. Find the rate confirmation for each. Write down whether fuel was inside the number, a separate line, or not mentioned. If you can't tell for either one, send the text above on the next load.
Check the next rate before you say yes
Fuel is one line in the math, but it's the line that changes what the posted number means. Once you know whether the rate is all-in, the question is whether it covers your cost per mile. Try HaulMath to run the numbers for a load before you give the broker an answer.
Common questions
- Does the posted rate on a load board include fuel?
- Often it's quoted all-in, but some postings split line haul and surcharge. The number alone doesn't say, so ask the broker whether it's including fuel or plus fuel and get it on the rate confirmation.
- What's the difference between 'including fuel' and 'plus fuel'?
- Including fuel means the surcharge is already inside the rate. Plus fuel means it's added on top. At $2.80 a mile with a $0.50 surcharge on 700 miles, that's $1,960 versus $2,310.
- Can I ask a broker to add a fuel surcharge on top of an all-in rate?
- If the quote was all-in, there's no surcharge line to add. Ask for a higher all-in total instead, and show how much more fuel costs you per mile.
- How much does a $1 rise in diesel add per mile?
- Divide the price change by your miles per gallon. At 6.5 mpg, $1.00 more per gallon adds about $0.15 a mile, or about $108 on a 700-mile load. Use your own mpg.
- Do leased owner-operators get the full fuel surcharge?
- Not necessarily. The share passed to you is set by your lease, so ask how it's calculated and where it appears on your settlement.
Run your own numbers
Free calculators for owner-operators: load profit, cost per mile, IFTA, per diem, and more. Every answer shows the math.