Blog
Posted Rate vs Lane Average: What a Lane Really Pays
A posted rate is one broker's offer, the board shows a 90-day average, and a 15-day average shows where the lane is today. Compare all three to your break-even before you call back.
A posted rate is one broker's offer. The lane rate on the board is a 90-day average, and a 15-day average shows what the lane pays today. Compare the offer to both and to your break-even before you answer, and you will know in two minutes whether to take it, counter it or pass.
Three different numbers all get called "the rate"
Most arguments about whether a rate is real come from mixing these up:
- The posted rate. The offer on the load. One number, from one broker, on one day.
- The board lane rate. DAT says the rate shown on the load board is the average of loads reported on that lane over the past 90 days, with the top 25% and bottom 25% left out to remove outliers.
- A short-window average. A rate tool like RateView can show anything from a 7-day average to a 365-day average. This is the one that tells you where the lane is now.
The board rate is a record of what was paid, not a price list
DAT's rates are built from agreed rates between brokers and carriers, reported as what companies paid carriers to cover loads. They are not bids or asking prices.
That makes the board rate good evidence in a rate talk. But 90 days is a long window. In a rising market it sits below what brokers are paying this week. In a falling market it sits above.
When the market is moving, quote the short window
Here is the rule:
- Steady market: the 90-day rate and the 15-day average land close together. Either one works as your reference.
- Rising lane: the 90-day rate understates the lane. Quote the 7-day or 15-day number.
- Falling lane: the 90-day rate overstates it. If you quote it, the broker will push back and you lose credibility on the call.
DAT's own FAQ says that on a lane where prices are volatile, the 7-day rate is the more precise read of today's market.
To see which way a lane is going, use the window gap:
Window gap = 15-day average minus 90-day average, in dollars per mile.
A positive gap means the lane is heating up and the board rate is stale. A negative gap means it is cooling.
Run the four-number check before you call back
You need four numbers per load: the posted rate, the 90-day rate, the 15-day average and your own break-even rate per mile.
In RateView, the steps are enter pickup and destination, choose a truck type and click Get Rates. It offers windows of 3, 7, 15, 30 and 90 days. DAT also says TruckersEdge Pro search results show the average lane rate paid by brokers for loads that moved in the past 15 days.
Do it in this order:
- Pick your equipment first. Vans, reefers and flatbeds have different averages, and comparing a van offer to a reefer average gives you a wrong gap.
- Pull the 15-day number, then the 90-day number.
- Write your break-even rate per mile next to them.
- Work out the dollars on the table: (15-day average minus posted rate) x loaded miles.
Your break-even should sit below both the posted rate and the lane average. If the posted rate is not above it, you pass, whatever the lane average says.
Example: the same 600 miles, four different answers
Example: say a 600-mile van load and a break-even of $1.95 a mile. These are illustrative numbers, not market data.
| Posted offer | 90-day board rate | 15-day average | Dollars on the table | Verdict |
|---|---|---|---|---|
| $2.30 | $2.35 | $2.65 | $210 | Rising lane. Counter at $2.65. |
| $2.10 | $2.40 | $2.15 | $30 | Falling lane. Ask for $2.15, take it if the broker holds. |
| $1.85 | $2.10 | $2.05 | $120 | Below break-even. Counter at $2.05, pass if it stays under $1.95. |
| $1.70 | $1.80 | $1.75 | $30 | The lane itself is below break-even. Pass. |
Row 1 is the one most drivers lose money on. The posted rate sits just under the board rate, so it looks fair. The 15-day average says the lane is moving up by $0.30 a mile, and that is $180 of the $210 gap that the 90-day number hides.
Row 2 is the opposite. The board rate says $2.40, but the lane has cooled. Ask for the 90-day number there and you are asking for money nobody is paying.
Row 4 is not a negotiation problem. When the lane average is below your break-even, pushing harder does not fix it. Look for a different lane, or a backhaul on the way out of it.
Counter at the average, not at the top of the range
Ask for the 15-day average. It is a number a broker can say yes to without checking with anyone. Go above it only when the 7-day number is higher than the 15-day number.
A broker has room to move because a broker makes money by charging the shipper more than it pays the carrier. You do not see the shipper's rate, so do not argue about it. Stay on what the lane has paid.
Say it plain:
- "You posted $2.30. The last two weeks on this lane have run about $2.65. Can you do $2.65?"
- "The board shows $2.35 on a 90-day average, but the last 15 days are running $2.65."
- If the broker says that is what the shipper is paying: "I get that. The lane has been paying $2.65 for the last 15 days. I can run it at $2.65."
- If the broker says no: "What is the most you can do on this one?" Then compare the answer to your break-even before you say yes.
Name the window every time. "The lane pays $2.65" is an opinion. "The last 15 days on this lane" is something the broker can check.
What each mistake costs
| Mistake | What it costs |
|---|---|
| Treating one posted rate as the market | The gap between the offer and the average, on every mile of the haul |
| Quoting the 90-day figure on a rising lane | You ask for less than the lane pays now, and the shortfall repeats on every load |
| Quoting a short-window spike on a falling lane | The broker pushes back and the load goes to another truck |
| Comparing van offers to reefer or flatbed averages | A gap that is not real, so a counter that is too high or too low |
| Chasing the average without checking break-even | A fair-market rate that still loses money on your truck |
| Ignoring the empty return | A good rate out, wiped out by deadhead coming back |
Do this in the next ten minutes
Pick the lane you run most. Pull its 90-day rate and its 15-day average for your equipment type. Subtract to get the window gap, then write down your break-even next to it.
If the gap is positive, the next broker who posts a rate on that lane is starting below the market, and you now have the number to say so.
Run the check without the spreadsheet
The four-number check is simple, but it is easy to skip when a broker is waiting on the phone. HaulMath is built for the freight math itself: your cost per mile, your break-even and whether a load pays, before you accept it. Try HaulMath and put your last three loads through it.
Common questions
- What time frame is the rate shown on a load board?
- DAT says the rate shown on the board is the average of loads reported on the lane over the past 90 days, with the top 25% and bottom 25% excluded. A rate tool can show shorter windows such as 7 or 15 days.
- Is the DAT rate a bid, an asking price or a paid rate?
- It is built from agreed rates that brokers and carriers reported, meaning what companies paid carriers to cover loads. It is not a bid or an asking price.
- Which is better to quote, the 7-day or the 90-day average?
- When the market is steady they land close together and either works. When the lane is moving, quote the 7-day or 15-day number, because the 90-day average lags.
- How much higher than the posted rate can I counter?
- Counter at the 15-day lane average for your equipment type. Go above it only when the 7-day number is higher than the 15-day number, and never counter below your own break-even.
- Should I ask the broker what the shipper is paying?
- You can, but it rarely helps, because you will not be able to check the answer. Stay on what the lane has paid over a named window, like the last 15 days.
- What if the lane average is below my break-even?
- Pass or look for a different lane or a backhaul. Negotiating harder does not fix a lane that pays less than your truck costs to run.
Run your own numbers
Free calculators for owner-operators: load profit, cost per mile, IFTA, per diem, and more. Every answer shows the math.