Blog
Why a High Rate Per Mile Load Still Loses Money
A high rate per mile only counts the miles the load pays for, so empty miles, dock time and fixed bills pull the real rate down. This five step check shows by how much, with a worked example.
A high rate per mile loses money when the rate only counts loaded miles. Add the empty miles to the pickup, the hours you sit at the dock and the bills that run whether the wheels turn, and a $4.50 load can pay like a $1.93 load. By the end you will have a five step check that tells you in two minutes whether to take a load and what rate to counter with.
The rate you see is what the load pays, not what the trip costs
Rate per mile is what a load pays. Cost per mile is what tells you whether it is worth running. Three things sit between the two numbers: empty miles, waiting time and fixed costs. None of them show up on the rate confirmation, and all of them come out of your pocket.
CRST breaks a true cost per mile into cash operating costs, capital recovery and time losses such as detention, congestion and breakdown downtime. A rate that ignores the second and third parts is only half a number.
Empty miles can turn a $4.50 load into a $2.70 load
Example: say a load pays $4.50 a loaded mile over 225 loaded miles, which is $1,012.50. The pickup is 150 empty miles away. Total miles are 375, so the load really pays $1,012.50 / 375 = $2.70 a mile. Doft makes the same point: a $4.50 load that needs 150 deadhead miles works out to roughly $2.70 per mile averaged across the whole distance.
Empty miles are not free either. Doft puts a conservative estimate at $1.20 to $1.80 per empty mile, so a 150 mile empty run costs $180 to $270 in hard expenses before you count the time. That covers fuel, maintenance, tires and insurance, plus the chance to be paid on another load. The deadhead miles guide goes deeper on pricing them.
Here is the same $4.50 rate next to a lower-paying load, using an all-in cost of $2.50 a mile (also an example, use your own):
| Load | Loaded rate | Empty miles | Pay | Blended per mile | Break-even pay | Left before waiting |
|---|---|---|---|---|---|---|
| A | $4.50 x 225 mi | 150 | $1,012.50 | $2.70 | $937.50 | +$75.00 |
| B | $4.50 x 225 mi | 300 | $1,012.50 | $1.93 | $1,312.50 | -$300.00 |
| C | $3.00 x 400 mi | 25 | $1,200.00 | $2.82 | $1,062.50 | +$137.50 |
Load C pays a third less per loaded mile than A and B, and it is the only one with real money left. Load B has the same high rate as A and loses $300 before the truck even sits at a dock.
Dock time costs you the free hours, even when detention is paid
The usual grace period is two hours, and detention only starts after it. The formula is (total detention time minus free time) x the hourly detention fee. The hours inside free time are never paid, so they are cost you carry.
Set your own hourly figure from your own costs. In the eCapital example, a carrier whose trucks cost $75.54 an hour to run charges $75.54 an hour once a truck is held past two hours. If the rate con pays less than your hourly cost, every hour past free time still loses money.
Example: say fixed bills are $3,000 a month, about $100 a day. Over a 10 hour day that is $10 an hour, and you want $30 an hour for yourself, so an hour at the dock costs you $40.
Now put Load A at a shipper that holds you 4 hours:
- No detention on the rate con: $75 left, minus 4 hours x $40 = $160, leaves -$85.
- Detention of $50 an hour after 2 free hours: you bill 2 x $50 = $100, so $75 + $100 - $160 leaves +$15.
That is a load that looked like $4.50 a mile and ends up a $15 day. The detention pay guide covers how to bill it.
Fixed costs keep running on the days you sit
Truck payment, insurance and permits are due whether the truck moves or not. CRST says fixed costs stay steady during slow weeks and downtime. A day lost to a 6 hour dock wait with no other load still carries its share. In the example above that is $100 a day before the load pays you anything.
This is why the wait costs money even when you are parked: the bills do not stop, and the miles that would have paid them were not run. Build your all-in number the way the cost per mile guide shows, then keep your fixed cost per day next to it.
Do not use the ATRI average as your all-in cost
ATRI's 2025 average cost to operate a truck hit a record $2.336 per mile, and $1.854 per mile excluding fuel. It is built on marginal costs, and fixed costs are not included. It is also an average across carriers, so it is not your truck.
Use it as a sanity check, nothing more. Example: Load A runs 375 miles, which is about 375 x $2.336 = $876 at the ATRI figure. The $1,012.50 pay leaves $136.50 for fixed costs and profit. If your own all-in number comes in well under the benchmark, go back and look for a bill you left out.
The two minute load check
Copy this and use your own numbers.
- Add the miles. Loaded miles plus the empty miles to the pickup. Add the empty miles you expect after the drop if that area has few loads.
- Find break-even pay. Total miles x your all-in cost per mile.
- Subtract it from the pay. If the result is not above zero, stop here.
- Charge the wait. Expected hours at both ends. Take away free hours that get paid back, then multiply by your hourly cost.
- Read the rate con. Check that the fuel surcharge, free time, detention rate and lumper terms are written on it. CRST lists whether the rate confirmation pays the fuel surcharge as designed as one of the things that moves your real cost per mile.
To find the rate to ask, use: (total miles x all-in cost + target profit) / loaded miles. Quote it per loaded mile, because that is how brokers read a rate.
Example: Load A, $2.50 all-in, $150 target profit. (375 x $2.50 + $150) / 225 = $1,087.50 / 225, about $4.83 a loaded mile. That is what covers the 150 empty miles and leaves you $150.
Say the empty miles out loud to the broker
Brokers read the loaded rate. Put the empty miles in the conversation before you take the load:
"The rate looks good on loaded miles, but I am [X] empty miles out. Counting those, I need [number] to cover it. Can you get to [number], with detention paid after two hours?"
Then get the free time and the hourly detention rate on the rate con in writing:
"Two hours free and $[your rate] an hour after that, on the rate con. Can you put that in writing?"
The full approach is in how to negotiate freight rates with brokers.
Five mistakes that make a high rate lose
- Comparing loads by loaded rate only. That is how a $4.50 load beats a $3.00 load on paper and loses $300 on the road.
- Pricing an empty mile at fuel only. It also carries maintenance, tires, insurance and the load you could have run.
- Guessing your detention rate. Check it against your hourly cost. If it is lower, each paid hour still costs you.
- Billing all the wait hours. Only the hours past free time are billable, so the pay is less than the wait cost.
- Treating a benchmark as your cost. A load that clears $2.34 a mile can still lose money once fixed costs go on.
Do this in the next ten minutes
Write down your monthly fixed bills and divide by the days in the month. Divide that by the hours you normally work and add the hourly pay you want for yourself. That is your cost of an hour at the dock. Then take the best paying load you ran last week and run it through the five steps above, empty miles included. If it comes out under break-even, you know what to ask for next time.
Know the number before the broker asks for an answer
The math above is simple, but it is easy to skip when someone is waiting on the phone. HaulMath is a calculation tool built for owner-operators and small fleets to do this load math fast. Try HaulMath before your next yes.
Common questions
- Is a high rate per mile always good?
- No. The rate only counts the miles the load pays for. Empty miles to the pickup, unpaid waiting time and fixed costs all pull the real rate down, so judge a load on blended rate against your all-in cost per mile.
- How do I count deadhead when I figure rate per mile?
- Divide the total pay by loaded miles plus empty miles. A $1,012.50 load with 225 loaded and 150 empty miles pays $2.70 a mile, not $4.50.
- What should I charge to cover empty miles?
- Use (total miles x your all-in cost per mile + target profit) / loaded miles. Quote the result per loaded mile, since that is how brokers read a rate.
- Do fixed costs matter if the truck is waiting?
- Yes. Truck payment, insurance and permits are due whether the truck moves or not, so a day at the dock still carries them. That is why an hour of waiting has a cost even when you are parked.
- Is detention pay enough to cover my waiting time?
- Only if the hourly rate is at least your hourly cost, and even then the free hours, usually the first two, are unpaid. Work out your own hourly cost and set your detention rate from it.
Run your own numbers
Free calculators for owner-operators: load profit, cost per mile, IFTA, per diem, and more. Every answer shows the math.