Blog
How to Get Truck Loads Without a Broker (and When It Pays)
You get truck loads without a broker by going to shippers directly, and it takes time you are not paid for. Here is how to start, and the payment-term math that decides whether a direct load really pays.
You find loads without a broker by going to shippers directly: research manufacturers and distributors near you that ship regularly, then call or visit them. Other routes people use are load boards, a dispatch service and word of mouth, but a load board is not a true "no broker" route, because brokers and shippers both post freight there. Going direct is described as the most sustainable route, and also the slower one. The part most guides skip is the math: a direct load only wins if it pays after the unpaid time and the wait for your money.
What "without a broker" really means
Three things get lumped together, and they are not the same:
- No broker. You haul for the company that owns the freight. Nobody sits in the middle.
- No load board. You find freight some other way. A broker may still be on the other end.
- A dispatcher. A person or service finds loads for you. Per the same guide, a dispatcher often still connects you with brokers, so you may still end up on a broker's load.
If your goal is to cut the middleman, only the first one does it. Be honest with yourself about which one you are after, because the effort is very different.
Check your authority first
If you plan to haul for shippers directly, you are the carrier of record. FMCSA's own page says a for-hire carrier needs operating authority, the MC number, on top of a USDOT number. Read that page yourself before you start calling shippers.
This post does not explain the rules. Requirements change, and a shipper can set its own insurance requirements on top of what the government asks. For the steps to get set up, see our guide on getting an MC number and DOT number. Then ask each shipper what they need from you.
Whatever authority, insurance and filing cost you carry is part of what a direct load has to cover. We are not giving any amounts here. Put your own numbers into your break-even rate per mile.
How to find direct shippers
Start close to home
The simplest method in the guides is to research local manufacturers and distributors that ship regularly. Look at the industrial parks near you. Open a map and zoom in on the places where trucks keep going in and out. Write down the business name, the dock hours you can see and who handles shipping.
Then call, or walk in
Cold calling and direct outreach take more time and effort, but can pay off with steady freight. Ask for the shipping or logistics contact. Say what equipment you run and what lanes you cover, and ask what they struggle to move. Keep it short. They get a lot of calls.
Audition through brokers
One path the guides describe is hauling a shipper's freight through brokers first, so you have a record when you approach that shipper directly. Pick a small list of local shippers you might serve later and run their freight well. The write-ups do not say how long this takes, and neither can we. Plan for months of patience, not a week.
Use people
Trucking is relationship-based, and a lot of profitable loads come from word of mouth. Drivers who run for a shipper can tell you who is easy to deal with at the dock. Ask them.
Know that some shippers will say no
Some direct shippers want multiple trucks and will not work with a single-truck operator, and some ask for higher insurance than a broker would. That is one site's view, and terms vary by shipper. Do not assume. Ask.
The math nobody puts next to the advice
Direct freight can pay a higher rate. It also costs you things a broker load does not. Here is the list to run before you decide:
| Cost of going direct | What to ask yourself |
|---|---|
| Unpaid prospecting time | How many hours of calls and visits did it take to land this shipper? |
| Empty miles to a new shipper | Is the first pickup far from where you unload? See deadhead miles. |
| Slower pay | How many days until the money lands? |
| Risk | If the shipper pays late or disputes the load, who is out the money? |
Payment terms: the part that bites small operators
Standard freight terms are net 30, meaning payment is due 30 days after the invoice date. The same site puts direct shippers at an average of about 30 to 45 days to pay, longer terms but consistent payment. Treat that as one site's estimate, not a rule. Another page argues that the real wait is closer to 35 to 40 calendar days, because the clock starts on a clean invoice and a signed bill of lading, and paperwork problems add days.
Many brokers, on the other hand, offer quick pay for a discount of one to three percent, paid in two to five business days. We do not know whether a given direct shipper offers anything like that. Ask.
A made-up example
All numbers below are invented to show the method. They are not market data, and they are not a promise of what you will earn.
Say a 700-mile load. A broker offers $2.65 a mile and a direct shipper offers $2.80 a mile.
- Broker load: 700 x $2.65 = $1,855. Say you take quick pay at 2 percent. That is $37.10 off, so you get $1,817.90 within a week.
- Direct load: 700 x $2.80 = $1,960. Net 45, so the money arrives about six weeks later.
On paper the direct load pays $142.10 more per load than the quick-pay broker load. Now count the other side:
- Say it took 10 hours of calls and visits to land that shipper, and the shipper gives you 10 loads. That is one hour of unpaid time per load. At an hour you would value at $30, that is $30 a load.
- Say you run two of these loads a week. With net 45, you have about six weeks of invoices out at once: 6 x 2 x $1,960 = $23,520 you have already earned and cannot spend. With quick pay on broker loads, it is about one week of invoices.
So the direct load still looks better on rate, about $112 ahead after the $30 of prospecting time. But you need to be able to carry that $23,520 on your own money, or pay a factoring company to carry it. Our guide on what freight factoring really costs shows how to work out what that does to the number. If the factoring fee eats the $112, the direct load did not pay. That is exactly why you run it before you say yes.
For the profit side of any single load, use is this load worth it. Your break-even rate is the floor. A direct rate that clears your floor but ignores the wait is still a bad deal for a small operator.
Get it in writing before you haul
A signed rate confirmation is described as a binding contract, so ask about anything left blank or vague. For a direct shipper, get these things written down:
- The rate, and that it matches what you agreed.
- Exact pickup and delivery addresses and hours.
- Who pays detention and lumpers. These often are not claimable unless they are on the rate confirmation, and our detention pay guide shows how to bill them.
- Payment terms, and when the clock starts.
- What paperwork they need from you. A clean invoice starts the clock, so see how to invoice a load.
The full list is in the rate confirmation checklist. Use it and do not rely on this short version.
When going direct is not worth it
You may do the math and find that a broker load with quick pay is the better choice right now. That is a fine answer. Direct freight tends to suit someone who can carry slow payment, has time to prospect and has a steady lane. If any one of those is missing, a mix of broker loads and a slow build of direct shippers can make more sense than quitting brokers cold.
Run the numbers, then decide
The question is not "broker or no broker". It is "does this load pay after my costs, my time and the wait for my money". If you want to do that math fast, with your own costs and not mine, try HaulMath. It is a calculator for freight cost and profit math, and you enter your own numbers. Try HaulMath
Common questions
- Can an owner-operator get loads without a broker?
- Yes, by hauling directly for shippers. You research local manufacturers and distributors, then call or visit them. Expect it to take more unpaid time than using a load board.
- Is a load board the same as going without a broker?
- No. Brokers and shippers both post freight on load boards, so a board does not guarantee a direct shipper. A load board is a way to find freight, not a way to skip brokers.
- Do I need my own authority to haul for a shipper directly?
- FMCSA says a for-hire carrier needs operating authority, the MC number, in addition to a USDOT number. Read the FMCSA page yourself, because rules and shipper requirements can change.
- Do direct shippers pay faster or slower than brokers?
- One site puts direct shippers at about 30 to 45 days to pay, while many brokers offer quick pay for a fee. Terms vary by shipper, so ask for payment terms in writing before you haul.
- How do I know a direct load really pays?
- Compare your break-even rate against the rate offered, then subtract your unpaid prospecting time and the cost of waiting to be paid. A higher rate can still lose if the wait forces you to factor the invoice.
Run your own numbers
Free calculators for owner-operators: load profit, cost per mile, IFTA, per diem, and more. Every answer shows the math.