Skip to content
Haul Math

Blog

How deadhead miles cut your profit per mile on the next load

Scott Wilder
By , Editor
Updated

Empty miles earn nothing, so they belong in the math of the load that makes you drive them. Here is the formula, worked examples and the benchmarks to compare against.

Count deadhead miles as part of the load that makes you drive them. Add the empty miles to the loaded miles, then divide the load's pay by that total, which is the Effective Rate Per Mile formula: gross revenue divided by loaded miles plus deadhead miles. In one published example, a load paying $4.00 a mile on 500 loaded miles drops to $2.86 a mile once 200 empty miles to the pickup are included. Both publishers sell related services (TrueMeasure Accounting sells load reporting and consulting, and Haulalytics sells load profit software), so we use them for formulas, not for sales claims.

The quick version

  • Total miles are loaded miles plus deadhead miles, per Haulalytics.
  • Effective rate per mile is pay divided by total miles.
  • Total cost is your cost per mile times total miles. Net profit is pay minus that cost, per the worked example from IFTACalculators.com, which offers a free load profitability calculator on that page.
  • Compare profit per total mile with your own floor. TrueMeasure calls $0.50 to $1.00 a healthy profit per mile and says values below $0.40 signal urgent repricing.
  • Track deadhead miles separately, as TrueMeasure advises, so you can see the pattern over time.

Why the rate per loaded mile misleads

A load board shows pay and loaded miles. Your truck burns fuel and wears tires on every mile, including the empty ones. The rate per loaded mile ignores those miles, so it flatters the load.

The IFTACalculators.com example shows the gap. A load pays $2,000 for 800 loaded miles, with 100 deadhead miles, at a $1.60 cost per mile. The rate per loaded mile is $2,000 divided by 800, which is $2.50. That number looks fine until you finish the math below.

The math, step by step

These steps use the figures from that same IFTACalculators.com example.

  1. Total miles: 800 loaded plus 100 deadhead is 900 miles.
  2. Total cost: $1.60 cost per mile times 900 miles is $1,440.
  3. Net profit: $2,000 pay minus $1,440 cost is $560.
  4. Profit per total mile: $560 divided by 900 is about $0.62 per mile.
  5. Margin: $560 divided by $2,000 pay is 28%.

Now leave the empty miles out, which is what many drivers do in their heads. Cost on loaded miles only is 800 times $1.60, or $1,280. Net profit would be $2,000 minus $1,280, or $720. Profit per mile would be $720 divided by 800, or $0.90. That is our arithmetic on the same figures. The difference is $0.90 minus $0.62, or $0.28 a mile that the empty miles take off the result.

If you do not know your cost per mile yet, start with our cost per mile calculator. For reference only, TrueMeasure puts industry-average total marginal costs at approximately $2.30 per mile. Your truck, lanes and fuel will differ.

Spreading deadhead cost across the paying load

The method above lumps empty miles into one all-in cost per mile. You can also price the deadhead in dollars and spread it over the miles you get paid for. That tells you how much to add to your rate per loaded mile.

Truck Dispatch Experts, which sells dispatch services and promotes a free deadhead calculator, gives this formula: deadhead cost is empty miles times (fuel cost per mile plus wear cost per mile), plus opportunity cost. It says that at current diesel prices, fuel runs $0.60 to $0.80 per deadhead mile, and wear usually runs $0.15 to $0.25 per mile. Its example: 200 deadhead miles at $0.75 fuel plus $0.20 wear is $190 in direct costs. Check it: $0.75 plus $0.20 is $0.95, and 200 times $0.95 is $190.

Here is a made-up example, not real data. It borrows the 200 empty miles and $190 from above and the 500 loaded miles from the Haulalytics example. Spread the $190 over 500 loaded miles: $190 divided by 500 is $0.38 per loaded mile. Your loaded-mile rate needs to clear your cost per mile plus that $0.38, before you count any profit.

TruckerPro, which offers a free deadhead calculator and consulting, puts the cost of an empty mile higher: roughly $1.00 to $1.30 for a Class 8 tractor-trailer in 2026. At those figures, 200 empty miles cost 200 times $1.00, or $200, up to 200 times $1.30, or $260. Spread over the same 500 loaded miles, that is $200 divided by 500, or $0.40, up to $260 divided by 500, or $0.52 per loaded mile.

TruckerPro, which offers a free deadhead calculator and consulting, gives a different breakdown for a Class 8 dry van. It lists fuel at $0.60 to $0.65 per empty mile and driver pay at $0.45 per mile if you pay for empty miles, and puts the all-in cost of an empty mile at roughly $1.00 to $1.30 in 2026. Pick the version that matches how you actually run, then use it every time. Our break-even rate calculator can turn your cost per mile into a minimum rate, and our deadhead miles calculator handles the empty-mile side.

Same rate, different deadhead: three worked loads

A bigger rate does not rescue a long trip back. Doft operates a loadboard and promotes it in its article, so read its framing with that in mind. The arithmetic below is still easy to check.

LoadRevenueTotal milesEffective rate
Doft example, long empty return120 × $4.50 = $540120 + 180 = 300$540 ÷ 300 = $1.80
Doft example, short return120 × $3.20 = $384120 + 40 = 160$384 ÷ 160 = $2.40
Haulalytics example$4.00 × 500 = $2,000500 + 200 = 700$2,000 ÷ 700 = about $2.86

The $3.20 load pays less per loaded mile than the $4.50 load. It still earns more per mile driven: $2.40 minus $1.80 is $0.60 a mile. Doft makes the same point with another case: a $3.50 a mile load with a 100-mile deadhead on the back has a real rate of $2.33 a mile. That is $3.50 minus $2.33, or $1.17 a mile gone.

Time matters too. Doft notes that a 180-mile deadhead at 65 mph takes nearly 3 hours.

What counts as a good result

The sources give different targets, which is a reason to set your own.

  • TrueMeasure: $0.50 to $1.00 profit per mile is healthy. Below $0.40 signals urgent repricing.
  • Haulalytics: successful owner-operators target $1.00 or more net profit per total mile, or $200 to $500 net on a typical 300 to 500 mile run.
  • Our own home page shows example numbers with a $0.50/mi profit target.

Our view: pick a floor from your own cost per mile and the weeks you need to cover, then hold to it. Targets from articles are a sanity check, not a rule.

It also helps to watch your deadhead percentage over time. TruckerPro gives the formula: empty miles divided by total miles, times 100. On the Haulalytics example, 200 divided by 700 is about 0.286, or 28.6%. For context, Truck Dispatch Experts says the national average deadhead rate is roughly 15% and that top carriers keep it under 10%. TruckerPro says most carriers run between 12% and 20%, and that above 20% is a flag for dry van and reefer carriers.

Check your fuel assumption

Fuel is the part of deadhead cost that moves fastest. TruckerPro's fuel figure for an empty mile ($0.60 to $0.65) assumes 6.5 to 7.0 mpg at $4.20 a gallon of diesel. Our home page shows an EIA diesel average of $6.352 a gallon for the week of Oct 26, 2026. Haulalytics says diesel can swing $0.20 to $0.40 a gallon in a week or two.

Our view: if your fuel price is well above the one a source used, rebuild the fuel line yourself. Fuel cost per mile is the price per gallon divided by your miles per gallon. Do it again when prices move.

Common mistakes

  • Pricing only the loaded miles. This is the $0.90 versus $0.62 trap shown above.
  • Doing it in your head. Haulalytics says even experienced drivers misjudge loads by $200 to $400 when they use mental math.
  • Mixing cost bases. Do not compare one load using fuel only against another using full cost per mile.
  • Not recording empty miles. TrueMeasure says to track deadhead miles separately in your TMS or accounting system.

Our view: charge the empty miles to the load that causes them, whether they come before the pickup or after the delivery. That is a pricing decision, not a tax rule. For how to treat any of this on your return, check with a CPA.

Put it into practice

Before you accept the next load, write down loaded miles, empty miles to the pickup, and any empty miles home. Then run the five steps above. By hand it takes a few minutes, and it is easy to slip when a broker is waiting. Run your numbers in the free load profit calculator, which shows the formula with your numbers in it, then compare the result with your floor.

Common questions

What is the formula for effective rate per mile with deadhead?
Divide gross revenue by loaded miles plus deadhead miles, as [TrueMeasure Accounting](https://truemeasureaccounting.com/load-profitability-reporting-for-trucking-2026-guide/) writes it. Use total miles, not loaded miles, as the divisor.
Should I count deadhead before the pickup or after the delivery?
Our view: count both as empty miles and price them into the load that causes them. If you are comparing two loads, give each the same treatment so the comparison is fair.
How much does a deadhead mile cost?
It depends on what you include. [Truck Dispatch Experts](https://truckdispatchexperts.com/resources/avoid-deadhead-guide/) lists fuel at $0.60 to $0.80 per mile and wear at $0.15 to $0.25. [TruckerPro](https://www.truckerpro.ca/blog/dispatch/deadhead-miles-trucking-calculate-price-reduce) puts a full empty mile at roughly $1.00 to $1.30 in 2026.
What is a normal deadhead percentage?
[Truck Dispatch Experts](https://truckdispatchexperts.com/resources/avoid-deadhead-guide/) gives a national average of roughly 15%. [TruckerPro](https://www.truckerpro.ca/blog/dispatch/deadhead-miles-trucking-calculate-price-reduce) says most carriers run between 12% and 20% deadhead.
Can I deduct deadhead miles on my taxes?
That is a tax question, and we cannot answer it as a certainty. The math in this guide is for pricing loads. Ask a CPA how empty miles are treated on your return.

Run your own numbers

Free calculators for owner-operators: load profit, cost per mile, IFTA, per diem, and more. Every answer shows the math.