Blog
How to Calculate Cost Per Mile for Two or Three Trucks
Add every truck's costs, add every truck's miles, divide once. Then keep a per-truck number next to it. Here is the three-truck sheet, the driver pay rule and the admin split.
Add every truck's costs for the month, add every truck's miles (loaded and empty), and divide once. That is your fleet's cost per mile, and DAT's formula works the same way: $90,000 of costs over 45,000 miles is $2.00 a mile. Keep a per-truck number beside it, because the fleet number sets your floor and the truck number prices a specific load.
Below is a three-truck sheet you can copy with your own figures, the rule for driver pay, the way to split office costs, and a check that tells you when a line is missing.
Build one row per truck, then one pooled row at the bottom
Example: say you run three trucks for one month, 21,000 miles in all. Truck 1 runs steady, Truck 2 has a salaried driver, and Truck 3 lost two weeks to a repair. Shared office costs (bookkeeping, dispatch software, phone) come to $2,100 for the month. These are illustrative numbers, not market data.
| Truck 1 | Truck 2 | Truck 3 | Fleet | |
|---|---|---|---|---|
| Miles (loaded + empty) | 9,000 | 7,500 | 4,500 | 21,000 |
| Fuel | $4,950 | $4,125 | $2,475 | $11,550 |
| Maintenance and tires | $1,170 | $1,350 | $2,400 | $4,920 |
| Driver pay | $5,400 | $5,600 | $2,700 | $13,700 |
| Truck and trailer payment | $2,600 | $1,900 | $2,600 | $7,100 |
| Insurance and permits (monthly share) | $1,500 | $1,450 | $1,500 | $4,450 |
| Admin share, split by miles | $900 | $750 | $450 | $2,100 |
| Total cost | $16,520 | $15,175 | $12,125 | $43,820 |
| Cost per mile | $1.84 | $2.02 | $2.69 | $2.09 |
Truck 1: $16,520 / 9,000 = $1.84. Truck 2: $15,175 / 7,500 = $2.02. Truck 3: $12,125 / 4,500 = $2.69. Fleet: $43,820 / 21,000 = $2.09.
The fleet number comes from the bottom row: total cost over total miles. It does not come from the three truck numbers above it.
Do not average the per-truck numbers
Average $1.84, $2.02 and $2.69 and you get $2.18. The real fleet number is $2.09. That is a 9 cent gap that comes from treating Truck 3's 4,500 miles as if they counted as much as Truck 1's 9,000.
On 21,000 miles, 9 cents is roughly $2,000 in a month. Quote off the wrong number and you either price yourself out of loads or you give away the difference without knowing it.
Use the truck number to quote a load and the fleet number to set your floor
Here is the rule I would run by.
| If you are... | Use... | Why |
|---|---|---|
| Quoting or accepting a load for one specific truck | That truck's own number | Payment, age and mpg differ from truck to truck |
| Deciding the lowest rate the business can live on | The fleet (pooled) number | It reflects all costs over all miles |
| Comparing a broker's offer before you know which truck runs it | The fleet number | Swap in the truck number once you assign the load |
| Looking at a truck that sits more than the others | That truck alone | Its fixed cost per mile jumps, and it hides inside the fleet number |
The last row is Truck 3. Its payment and insurance are $4,100 for the month. Spread over 4,500 miles that is 91 cents a mile. On Truck 1 the same $4,100 spread over 9,000 miles is 46 cents. FleetRabbit's benchmark guide shows how far this swings: the same fixed cost works out to 74.2 cents a mile at 60,000 miles a year and 40.5 cents at 110,000.
If one truck is far above the fleet number, check its miles first, then its repairs, then its payment. In the sheet above, the answer is miles, plus a $2,400 repair bill.
Pick one treatment for driver pay and never switch it mid-year
Driver pay is the line that makes small-fleet sheets messy. Two clean options:
- Paid per mile: treat it as a variable cost. It rises and falls with the miles, like fuel.
- Paid a salary: treat it as a fixed cost, along with the truck payment and insurance. FleetRabbit draws the same line: costs that move with every mile, and costs that arrive every month whether the truck moves or not.
The example mixes both on purpose. Trucks 1 and 3 pay $0.60 a mile ($5,400 and $2,700). Truck 2 pays a salary and benefits of $5,600. Truck 2's driver cost does not fall when the truck sits, and that is why a salaried truck gets expensive fast in a slow month.
The mistake that costs you is changing the treatment from month to month. Do that and you cannot tell whether costs rose or you just moved a line. Pick one, write it at the top of the sheet, keep it.
Split office costs by miles so a low-mile truck does not look cheap
Add the month's bookkeeping, dispatch, software, phone and any office rent into one admin block. Then split it by each truck's share of fleet miles.
$2,100 over 21,000 miles is $0.10 a mile. Truck 1 ran 9,000 miles, so it carries $900. Truck 2 carries $750. Truck 3 carries $450.
Split it evenly by truck instead ($700 each) and Truck 3 takes $700 of admin on 4,500 miles. That adds 5 cents a mile to a truck that is already your most expensive. An even split also makes your busiest truck look better than it is.
Spread annual bills over twelve months
If you pay insurance or permits once or twice a year, divide the bill by 12 and put that share on every monthly sheet. Book it only in the month you pay it and one month looks like a disaster while the next eleven look great. The monthly share is the figure in the "insurance and permits" row above.
Count empty miles in the miles, every time
The divisor is loaded plus empty miles. Leave out deadhead and the miles shrink while the costs stay, which pushes your cost per mile up and makes your cost per loaded mile look different from your sheet. The cleaner way is to keep one number that uses all miles for cost, and then compare it to what each load pays on its loaded miles. Deadhead gets its own full breakdown here.
Check your total against the industry average for missing lines
The fleet number above is $2.09. The American Transportation Research Institute put the 2025 industry average at $2.336 a mile. Do not read that gap as good news.
A fleet that sits below the average is often missing a line. Look at two in particular. The same ATRI figures, as reported by The Trucker, show driver benefits at 21.0 cents a mile and tolls at 4.3 cents. Together that is about 25 cents, which is the size of the gap here. The example sheet has no tolls row and no benefits for the per-mile drivers.
So add the two columns to your sheet. If your number still comes in under the average, good. If it lands above, start with the biggest lines: driver pay and benefits, then repairs and maintenance.
Price a long-sit load by the day as well as the mile
A cost per mile spreads fixed cost across miles. A load that holds the truck for an extra day carries that day's fixed cost whether the wheels turn or not. ATBS lays out the method: divide a week of fixed costs by 7 to get a fixed cost per day, then price a load as days times the daily fixed cost, plus miles times fuel and other running costs, plus tolls and fees.
Example: a truck with $1,400 a week in fixed costs carries $200 a day. A 600-mile load that takes 2 days, at $0.55 fuel and $0.95 other running cost a mile plus $40 in tolls, costs $400 + $330 + $570 + $40 = $1,340. That is $2.23 a mile. Let a slow unload stretch it to 3 days and it is $1,540, or $2.57 a mile. One extra day moved break-even by about 33 cents a mile.
To see the per-day math for a single load, see the profit per day walkthrough.
The seven-step monthly routine
- Pick one period, a calendar month, and use it for every truck.
- For each truck, write down loaded plus empty miles, fuel, maintenance and tires, truck and trailer payment, insurance and permits (monthly share).
- Add driver pay as its own line. Use the same treatment you used last month.
- Total the shared office costs as one block and split it by each truck's share of miles.
- Divide each truck's total by its miles. That is the per-truck number.
- Add all totals, add all miles, divide once. That is the fleet number.
- Compare the two. If a truck is far above the fleet number, look at its miles, repairs and payment, in that order.
Before you file the sheet, tick these:
- Empty miles are in the miles
- Driver pay is on its own line, same treatment as last month
- Annual bills are spread over 12 months
- Admin is split by miles, not by truck
- Tolls and driver benefits have a column
- The fleet number comes from the bottom row, not from averaging
Do this in the next ten minutes
Pull last month's miles for each truck from your ELD, fuel receipts or settlement statements. Write three numbers on a page, one per truck. Then add the fuel total for each. Those two lines are the hard part, and the rest of the sheet fills in from bills you already have. If you have never worked out the number for a single truck, start with the single-truck method and come back.
Know the number before the broker asks
A broker knows his margin on your load. You should know your cost on it. HaulMath is built to help owner-operators and small fleets work out their real cost per mile, their break-even rate and whether a load pays before they accept it. Try HaulMath and run your own figures through.
Common questions
- Should I use one cost per mile for the whole fleet or one for each truck?
- Keep both. Use the pooled fleet number to set the lowest rate the business can live on, and use each truck's own number to quote or accept a load for that truck.
- Do I count empty miles when I calculate cost per mile?
- Yes. Divide total costs by loaded plus empty miles for the same period. Then compare that number to what each load pays on its loaded miles.
- How do I treat a driver on salary versus a driver paid per mile?
- Treat per-mile pay as a variable cost and salary as a fixed cost. Either works, but pick one treatment, write it on the sheet and keep it the same every month so the trend means something.
- How do I split office and admin costs across two or three trucks?
- Add up bookkeeping, dispatch, software, phone and office costs for the month, then divide by total fleet miles. Each truck carries its own miles times that rate, so a low-mile truck does not look cheap.
- How do I handle insurance and permits that I pay once or twice a year?
- Divide the bill by 12 and put that share on every monthly sheet. Booking it only in the month you pay makes one month look terrible and the others look great.
- What is a good cost per mile for a small fleet?
- The American Transportation Research Institute put the 2025 industry average at $2.336 a mile. Use it to check that no line is missing from your sheet, not as your own number.
Run your own numbers
Free calculators for owner-operators: load profit, cost per mile, IFTA, per diem, and more. Every answer shows the math.