Blog
How to Calculate Profit Per Day on a Trucking Load
Profit per day is the pay minus miles times cost per mile, minus days times your fixed cost per day, divided by the days. Here is the worksheet and a two-load example.
Profit per day on a load is (pay minus miles x your cost per mile minus days x your fixed cost per day) divided by the days the load holds your truck. By the end of this you can run that on any two loads and pick the one that earns more per day, not just more per mile.
The rest of this is the worksheet, a two-load example, and the rule for when to pass.
Judge a load by what it earns per day of truck time
Rate per mile tells you how well a load pays while the wheels turn. It says nothing about the days the truck sits. Your truck payment, insurance, phone and bookkeeping keep running whether you are rolling or parked, and Overdrive's self-dispatch guidance says the most successful owner-operators pick loads that bring in the highest revenue per day.
So the question is not "what does this pay a mile?" It is "what will this leave me per day, after it has used up my truck for as many days as it will?"
If you want the whole-load version first, start with Is This Load Worth It?. This page takes the next step and divides by days.
The profit per day worksheet (copy this)
- Fixed cost per day = monthly fixed costs / working days in the month.
- Variable cost per mile = fuel + maintenance + tires and brakes. Your own number, not a borrowed one.
- Total miles = loaded miles + deadhead miles to the pickup.
- Days on the load = total miles / miles you really run a day, rounded up, plus any wait days.
- Load cost = (total miles x variable cost per mile) + (days x fixed cost per day).
- Profit per day = (pay minus load cost) / days.
- Compare it with your daily target and with the other loads you could run in the same days.
One line to keep on your phone:
Profit per day = (pay - miles x cost per mile - days x fixed cost per day) / days
Divide fixed costs by working days, not by 30
Start with the days. Pick how many days a month your truck is actually out earning. Overdrive's Partners in Business manual plans around about 19 working days a month, and I will use 19 below.
Example: say your fixed costs are $4,000 a month. That is $4,000 / 19 = about $211 per working day. Overdrive's own example does the same thing with $3,725 a month over 18 days under load, about $207 a day.
Divide the same $4,000 by 30 calendar days and you get $133. Every load now looks about $78 a day better than it is. It is the first thing to check if your loads look better on paper than in your bank balance.
There is a second method: ATBS divides weekly fixed costs by 7 to get a per-calendar-day figure. That is fine for a weekly view of the business. For judging one load, use working days, and do not mix the two in the same comparison, or one load will look cheaper than another for no real reason.
Your own number will not match mine. Fixed cost per day in published examples runs from roughly $108 to $290 or more, so copying someone else's figure can put you off by over $100 a day on every load you price.
Count the days before you count the dollars
This is the input most people guess at, so do it on purpose.
Take total miles, deadhead included, and divide by the miles you really cover in a day. Round up. Then add any day the truck will sit: a pickup you cannot reach until morning, an appointment that makes you wait, a reset you will need.
Which miles-per-day figure should you use? OTR Solutions puts typical drivers at about 500 to 600 miles a day. The 11-hour driving limit sets a ceiling of roughly 715 miles at 65 mph the whole way, as ATS works out, and real driving does not reach it. Matrack's estimate is about 2 to 3 days for a 1,000-mile load. Use your own average, and when you do not have one, plan on the low end, about 500. The hours of service guide covers the 11 and 14 hour limits behind that number.
Local and city-heavy runs are slower, around 300 to 500 miles a day, so do not use a long-haul figure for them.
Example: 900 total miles / 500 miles a day = 1.8, so call it 2 days. If the receiver only unloads at 8 a.m. the next morning, that is 3 days. A day you did not plan for still costs a full day of fixed cost.
Example: the higher rate per mile loses on a per-day basis
Example: say your fixed cost is $211 a day and your variable cost is $1.10 a mile. Both loads are offered to you this morning.
| Load A | Load B | |
|---|---|---|
| Pay | $2,800 | $1,000 |
| Loaded miles | 800 | 300 |
| Deadhead miles | 100 | 0 |
| Total miles | 900 | 300 |
| Rate per loaded mile | $3.50 | $3.33 |
| Days on the load | 3 (2 driving, unload next morning) | 1 |
| Variable cost (miles x $1.10) | $990 | $330 |
| Fixed cost (days x $211) | $633 | $211 |
| Profit | $1,177 | $459 |
| Profit per day | $392 | $459 |
Load A has the better rate per mile and the bigger check. Load B earns $67 more per day of truck time, and it hands you the truck back two days sooner for the next load. If you can find a next load for those two days, B is the better call. If the truck would sit, A wins. That is the "when X, do Y" part: when the freed-up days will be filled, take the higher profit per day.
Add your own pay and the picture changes
The example above leaves your own pay out. If you count yourself as a fixed cost, say $5,000 a month, Overdrive's example does this too at about $278 a day on its numbers. Here the total fixed cost becomes $9,000 / 19 = about $474 a day.
| Load A | Load B | |
|---|---|---|
| Fixed cost (days x $474) | $1,422 | $474 |
| Profit | $388 | $196 |
| Profit per day | $129 | $196 |
Both loads shrink, and A falls much further, because it uses three days of an expensive truck-plus-you.
Set a daily target first, then say yes or no
ATBS advises every owner-operator to net at least $175 a day in profit. Treat that as a rule of thumb, not a promise. Your number should come from your own costs and what you need to take home.
With a $175 target, in the second table Load B passes at $196 a day and Load A fails at $129. Here is the rule:
| Profit per day is... | Do this |
|---|---|
| At or above your target | Take it, if no better load fits the same days |
| Below target but above your fixed cost per day | Counter the rate before you say no |
| Below your fixed cost per day | Pass. It does not cover the truck's standing costs |
To see how much you need to counter, rearrange the worksheet. Pay needed = (target x days) + (miles x cost per mile) + (days x fixed cost per day). For Load A on the second set of numbers: $175 x 3 = $525, plus $990, plus $1,422 = $2,937. You need about $2,940 to hit your target on that load, against $2,800 offered. That is a $140 counter, and you can say exactly why. The broker negotiation guide has the wording for that call.
Find out whether the rate or the miles is the problem
When a day comes in low, split it. ATBS defines average revenue per day as revenue per mile times miles driven. Low rate with a lot of miles still leaves the day short, and the extra miles raise some of your costs.
- Rate problem: you ran plenty of miles but the rate per mile was thin. Counter higher or skip those lanes.
- Miles problem: the rate was fine but you sat, deadheaded or waited. Fix the days, not the rate.
Five mistakes that make a load look better than it is
- Dividing by 30 days. Costs you about $78 a day in the example above.
- Using a number from a forum. Published fixed costs per day vary by more than $100. Use yours.
- Leaving deadhead out. Empty miles still burn fuel and wear tires. Put them in total miles.
- Forgetting the unload day. A truck waiting on a dock is still a day of fixed cost.
- Leaving your own pay out. In the example it moved Load A from $392 to $129 a day.
If you would rather not build this in a spreadsheet, there are other free calculators, such as the 123Loadboard Cost Per Day Calculator. For your variable cost per mile input, use the cost per mile guide.
Do this in the next ten minutes
- Write down your monthly fixed costs.
- Pick your working days for the month (19 if you have no better number).
- Divide, and keep the result on a sticky note on the dash.
- Run the worksheet on the last load you took.
If the answer is under your target, you have just found out what that load really paid.
Run the numbers before you accept the next one
The math is five lines, but it gets skipped when a broker is waiting on you. Try HaulMath to run your cost per mile and load numbers before you say yes. It does freight math for owner-operators and small fleets, and the numbers are only as good as the inputs you give it. It is not a replacement for an accountant on taxes.
Common questions
- How do I figure profit per day on a load?
- Subtract your variable cost (miles x cost per mile) and your fixed cost (days x fixed cost per day) from the pay, then divide what is left by the days the load holds your truck. Use total miles, including deadhead.
- Should I divide fixed costs by 30 days or by the days I actually run?
- Use the days you actually run. Dividing by 30 spreads costs over days the truck was not earning, so every load looks better than it is. In the example in this article it hid about $78 a day.
- How many days a month should I use for working days?
- Use your own average. Overdrive's Partners in Business manual plans around 19 working days a month, which is a fair starting number if you have no history.
- Do I count my own pay as a cost?
- Yes, if you want to know what the load leaves after paying you. It can more than double fixed cost per day, as in the worked example here, where it moved the figure from $211 to $474 a day.
- Do deadhead miles count?
- Yes. Add them to total miles for both variable cost and the day count, since empty miles burn fuel and use up truck days.
- What is a good profit per day for an owner-operator?
- ATBS advises netting at least $175 a day as a rule of thumb. Set your own target from your own costs and what you need to take home.
Run your own numbers
Free calculators for owner-operators: load profit, cost per mile, IFTA, per diem, and more. Every answer shows the math.